Corrosion Monitoring Services

High Angle Inspection and Repairs Extend Equipment Life

CMS was recently contracted to provide rope access inspection services to assess the condition of the conditioning tower transition duct in a cement plant. The project was staffed using qualified MSHA Part 46 and confined space high angle trained employees.

Lehigh Cement Silo Cleaning Project

When Lehigh’s cement plant in Glens Falls, New York ran into a particularly hard problem in its largest cement storage silo, Plant Manager David Dreyer eventually turned to the safest inspection and repair option he could find for a solution.

Three Ways Thermal Imaging Can Help Identify Hidden Problems

Thermal imaging equipment can have a significant impact on unit performance (operating cost), equipment reliability, and environmental compliance.

Condenser Maintenance Services

Corrosion Monitoring Services has developed a suite of tools and services to evaluate the operational performance of your surface condenser.

Corrosion Mechanisms - Active Oxidation of Iron by Chlorine Attack

The primary biomass fuels, bark, wood chips, sawdust, and other waste products originating from these contain low concentrations of chlorine and sulphur that can result in severe corrosion if the moisture, temperature, and pressure of the gas are withing specific activation range.

High Angle Inspection Enables Better Planning

CMS inspectiors can identify areas of degradation that and make proactive repairs to extend equipment service life.

High Angle Inspection and Repairs Extend Equipment Life

CMS inspectors are often able to spot cracks and other damage before they grow into bigger problems.

Mechanical Dust Collector Maintenance

Mechanical Dust Collector maintenance helps extend asset life cycle while improving overall plant efficiency.

Acid Dew Point for Tubular Air Heaters

CMS has developed an Acid Dew Point Estimator (ADPE) tool to calculate acid dew point of the acids found in fossil fuel combustion gas.

Focus in on Repairing Isolated Problem Areas with APRIS

CMS uses APRIS non-destructive test to inspect each tube individually, technology that enables inspectors to identify not only the existence of tube failures, but also pinpoint their location.

Clinker Cooler Rapid Repair Options

If your clinker cooler is underperforming or in the process of failing, we have some good news for you. In many cases, it can be repaired rather than replaced.

CMS Blog